Barco Led Pro, Руководство пользователя

Страница: 86 / 186

72 LED-PRO • User’s Guide
4. Operation
Using the Expert Mode Menu
qóéÉ
From the Input Setup Menu , select Type to choose among the possible signal types
available at the current input channel. Please note:
•
Values are: RGB, YPbPr, NTSC/PAL/SECAM, SDI, and DVI.
•
When “ In Auto Acquire ” is enabled, the “type” selections will be limited
depending on the signal present on the currently selected input.
S
If input 1 is connected to a DVI source, DVI will be the only choice — which
cannot be changed. Similarly, SDI will be the only choice whenever the SDI
input is selected.
•
When “ In Auto Acquire ” is off, the “type” selections are expanded to allow you to
manually select the Video type.
`çäçêëé~ÅÉ
From the Input Setup Menu , select Colorspace to choose among the possible component
video standards for YPbPr. Please note:
•
Values are: RGB, SMPTE, BETA and M-II.
•
For all other video types, color space is set to RGB and cannot be changed.
•
The default selection for YPbPr is SMPTE. You may change this setting to BETA
or M-II to allow the LED-PRO to correctly sample the Y, Pb and Pr components
across their full dynamic range.
pçìêÅÉ=^äáÖåãÉåí
From the Input Setup Menu , select Source Alignment to display one of three Source
Alignment menus — depending upon the format of the selected source — analog, SDI or
DVI. These procedures are identical to those located on the Setup Menu .
•
For analog input sources, refer to the “ Source Alignment — Analog ” section on
page 43 for instructions.
•
For SDI input sources, refer to the “ Source Alignment — SDI ” section on
page 46 for instructions.
•
For DVI input sources, refer to the “ Source Alignment — DVI ” section on
page 48 for instructions.
`ìëíçã=få=cçêã~í
From the Input Setup Menu , select Custom In Format to display the Custom Input
Formats Menu , which enables you to define and save a new input video format — or to
edit and save a previously-defined format. Please note:
•
Saved formats are stored in a user library, which is searched (after the standard
system library is searched) during the auto-acquisition process.
•
All saved formats are available as input formats on any input channel.
•
A maximum of 32 custom formats may be stored.