Barco IMAGETILE, Системное руководство

Страница: 95 / 135

System manual ImageTile 96
displayed saying “you must have administrator rights to modify a
default scheme.” If an administrator saves a scheme using an
existing default scheme name, a message is displayed to tell the user
that the modification is saved to a default scheme and will be visible
to all users. If the administrator saves a scheme using a new name,
then the user is asked if the scheme should be saved as a default
scheme or a private scheme. Since there is no distinction between
how a default scheme and a private scheme is displayed, it is highly
recommended that the user use a different naming convention to
distinguish the two (i.e. use “DEFAULT: ...” for default schemes).
Private schemes are shared and visible to all users of the system.
Users who do not have administrator privileges can create, modify or
delete private schemes. However, only the user who created them
can modify or delete them. When the delete button is pressed, the
user is asked to confirm the delete request.
Using the BarcoMetheus DPMS Screen Saver
To set up the Barco Metheus DPMS Screen Saver using one of the
three default schemes, please do the following:
1. Open the “Display Properties Control Panel” by right clicking on an
empty space of the desktop and then select the “Screen Saver”
tab (see figures 58, 59 and 60).
2. Select the “BarcoMetheus DPMS Screen Saver” in the “Screen
Saver” drop down menu if it is not already selected.
3. Click on the “Settings” button. The “Barco Metheus DPMS
Screen Saver Control Panel” will open (see figure 58).
4. Use the default schemes by selecting one of the three default
schemes. Click “OK”. Then Click “OK” again.
Note: If you make any changes to any of the settings of one of the
three default schemes, the Current Scheme field will blank and you
MUST SAVE your changes by clicking on the “Save As ...” button.
When you click on the “Save As ...” button, the name of the last
scheme you used will be automatically displayed, you can then
choose to use that scheme name or enter a new name. After the
you have saved the scheme, then click OK and the new scheme
will be in effect.
BarcoMed software driver installation