Barco IMAGETILE, Системное руководство

Страница: 64 / 135

System manual ImageTile 65
ImageTile Software CD does not support the installed devices, the
dialog box will be empty, and program will exit when the user clicks
“Finish” or “Cancel”. Select the devices you want to install, click
“Next”.
Figure 37: Supported Devices Screen
10. If you selected a device with an existing driver, the existing driver’s
version will be compared against the version of the driver you are
installing. If the existing driver’s version is newer than the one you
are installing, the above message will appear as a warning (see
figure 38). If you choose to continue, your existing driver will be
replaced. Click “OK” to continue.
Figure 38
If you want to change your selection, click “OK” to continue and
then click “Back” on the next screen.
11. Your selection on the screen shown in figure 41 will determine if
DualView is enabled or not. DualView allows a dual head imaging
board to display two separate desktops, one for each display
instead of a single virtual desktop that spans across both displays.
DualView is a feature that is automatically supported by Windows
XP. However, BARCO has provided a means for you to disable
this functionality while running Windows XP. Figures 39 and 40
on the next page shows the difference between running without
and with DualView enabled under Windows XP.
BarcoMed software driver installation