Barco IMAGETILE, Системное руководство

Страница: 63 / 135

System manual ImageTile 64
6. Windows XP may also tell you that it has finished installing new
devices and may ask you if you want to restart your computer.
Click “No”.
7. Insert your ImageTile Software CD into your computer’s CD drive.
The “BarcoMed Driver Installation Wizard” should start
automatically. If it doesn’t start within 5 minutes, browse the
contents of your ImageTile Software CD and double click on the
file: “NTDriverInstaller.exe” to start the Wizard.
8. Click “Next” on the Wizard Welcome Screen to continue or
“Cancel” to exit the Wizard (see figure 35).
Figure 35
If you select “Cancel”, a dialog box (figure 36) will open asking
you to confirm cancellation of the install process. If you choose
“Yes”, the Wizard will exit. If you choose “No”, the Wizard will
continue normally.
Figure 36
9. The Device Selection Screen’s dialog box should show only those
devices physically installed and supported by the Barco graphics
device driver on your ImageTile Software CD (see figure 37). If
there are no Barco devices installed or if the driver on your
BarcoMed software driver installation