Barco IMAGETILE, Системное руководство

Страница: 35 / 135

System manual ImageTile 36
Installing the BarcoMed Imaging Board
Windows NT 4.0 Display Driver
Installing the Driver Using the BarcoMed Driver Installation
Wizard
SPECIAL NOTE: Prior to installing the BarcoMed Display Drivers you
MUST install the BarcoMed Imaging Board(s), connect the ImageTile
display panel(s) to the card(s) and turn the ImageTile display on.
Refer to the Hardware Installation section of this manual for
instructions on installing the BarcoMed Imaging Board(s) and
connecting them to the ImageTile display panel(s).
To install, reinstall or update the BarcoMed 3MP2FH Imaging Board
Windows NT 4.0 Display Driver, log in using an account with
administrator privileges and follow these steps:
1. Insert your ImageTile Software CD into your computer’s CD drive.
The “BarcoMed Driver Installation Wizard” should start
automatically. If it doesn’t start within 5 minutes, browse the
contents of your ImageTile Software CD and double click on the
file: “NTDriverInstaller.exe” to start the Wizard.
2. Click “Next” on the Wizard’s Welcome Screen to continue or
“Cancel” to exit the Wizard (see figure 4).
Figure 4
If you select “Cancel”, a dialog box (see figure 5) will open asking
you to confirm cancellation of the install process. If you choose
“Yes”, the Wizard will exit. If you choose “No”, the Wizard will
continue normally.
BarcoMed software driver installation