Barco IMAGETILE, Системное руководство

Страница: 26 / 135

System manual ImageTile 27
Bracket mounting instructions
- The wall must be a solid concrete wall.
- The wall must be strong enough to bear a weight of at least 4
times the panel you are installing. Please refer to the Technical
specifications chapter to know the weight of the panels.
- Screws must be size M8, 8 cm long
- The screws must be matched to be used in concrete.
- Use 4 screws: One for each suspension hole. Do not leave any of
the suspension holes open.
Mounting height
We advise to mount the panel so that the center (in vertical sense) is
at eye level.
The location of the fixation holes with respect to the vertical center of
the ImageTile image, is indicated in the following illustration.
Fixing the panel to the wall bracket
- The wall bracket has 2 inclined sliders.
- The rear of the panel is provided with a 'keystone' metal plate.
- Mount the panel so that the 'keystone' plate slides into the inclined
sliders.
- Lock the panel in its position by turning the bracket 'lock' 1 quarter-
turn.
ImageTile installation
center of
image
600 mm
212 mm
172 mm
Bracket lock