Barco Event Master E2, Руководство пользователя

Страница: 85 / 307

6. GUI orientation
6.10 Con fi guration Menu > System modi fi er area
General
General parameters concerning the selected system are accessible on this area. The user can select the system’s native rate and
mode (2K/Dual Link/4) and genlock mode.
Description
Image 6-13
Modi
fi er area
• Mode : System wide mode for what kind of Inputs / Layers / AUX Destinations can be made : 2K / DL / 4K
- Based on the selected mode, this is the default Layer size that will be added to the Screen Destinations
- If the selected system mode con fl icts with the existing destination mode, a message will appear warning that existing layer
assignments will be deleted and requesting for veri fi cation to continue
- Aux Destinations are not affected by this mode
• Native rate : System native rate in Hz (Cycles in second). Available selections:
23.98 30 59.94
24 47.95 60
25 48
29.97 50
• Genlock mode : Selects the system genlock mode to Freerun or Lock to External
• Genlock Status : Reports the system’s genlock mode status: Locked or not Locked
• H Offset and V Offset : Adjusts the pixels and lines that the internally generated genlock signal is offset from the external signal.
This adjustment is only enabled when Genlock mode is set “Lock to External”
• Master VP : Reports the units IP address
R5905948 E2 12/12/2014 81