Barco Event Master E2, Руководство пользователя

Страница: 217 / 307

10. Maintenance
10. MAINTENANCE
About this chapter
This chapter describes how to service the E2 by replacing individual components.
Simple servicing
E2 is based on a modular design that ensures easy serviceability. Users can swap most of the E2 components in the case of
damage, without shiping the unit to a Barco service center.
Methodology
Most procedures in these chapters include multiple steps to gain access to the parts requiring service. A work fl ow fl ow chart is pro-
vided next indicating all of the procedures and their relationships. Please refer to the chart to familiarize yourself with the sequence
of procedures.
ESD recommendations
The following precautions must be taken:
•
Perform the Service procedures only at approved anti-static work station equipped with anti- static mat.
• At all times use a conductive wrist strap attached to a solid earth ground.
• Always discharge yourself by touching a grounded bare metal surface before coming in contact with ESD sensitive electronic.
W
ARNING
:
Always switch power off and unplug the cords from E2 before performing any maintenance op-
erations described in this chapter.
W
ARNING
:
E2 can be damaged by electrostatic discharge (ESD). When handling E2 and any of its compo-
nents, caution must be taken so that damage does not occur. Damage due to inappropriate handling is not
covered by the warranty.
R5905948 E2 12/12/2014 213