Barco Event Master E2, Руководство пользователя

Страница: 87 / 307

6. GUI orientation
6.12 Con fi guration Menu > Adjustment > Unit Con fi guration
General
In the unit con fi guration adjustments panel, the user can de fi ne and adjust unit (device) speci fi c parameters.
How to access to the unit con fi guration adjustments panel
1. Select the device (unit) you want to con fi gure. Refer to the section “How to select device” in the system in the chapter "Con fi gu-
ration Menu > System diagram area", page 79.
The device is selected. The device is highlighted in blue in the System diagram area and the name of device is indicated in the
Adjustment tab in the Adjustment area .
2. Click on the Adjustment tab in the Adjustment area .
The adjustment panel dedicated to the unit is displayed.
Description
System tab:
•
Name : The name of the unit can be edited here
• Contact info : User information for contact person responsible for the unit
• Unit Mode : Always 20M Pixels
• SW version area: Unit’s SW version and the latest available SW. If the versions
are different the ‘Upgrade SW’ button will be lit to allow users to upgrade /
downgrade the SW on the VP.
• Resets (If the user selects one of the reset options, a con fi rmation pop up will
appear) :
-
Soft Reset : Resets the unit without erasing any stored settings
- Factory (Full) : Full factory reset erases all stored settings
- Factory (Save IP) : Full factory reset with the exception of keeping the
Ethernet setup
- Factory (Save IP & EDID) : Factory reset, but keep IP and Input EDID
settings
• Ethernet communication setup area
Setup tab:
•
Unit ID: Unique unit identi fi cation number
• Front Panel: locks or unlocks the front panel.
• Front Panel VFD Brightness : Updates the brightness of the front panel VFD
• Genlock
-
Freerun
- Lock to Ext BNC
• Genlock Status:
-
N/A : When Genlock is set to Freerun
- Not Locked : When Genlock is set to Lock to Ext BNC but lock is not achieved
- Locked : When Genlock is set to Lock to Ext BNC but lock is achieved
• Black on Invalid video : If checked, when the input timing on the video does not
match what was previously acquired on the input connector the video will be
set to black
R5905948 E2 12/12/2014 83