Barco Event Master E2, Руководство пользователя

Страница: 173 / 307

7. System Setup
7.12 Con fi guration Menu > Add Inputs
General
In this procedure, you will add Inputs to the system .
Prerequisite
• Ensure that you are familiar with the Con fi guration Menu . For details on this menu, please refer to chapter "Con fi guration
Menu", page 76
If more than one Input is utilized, repeat the below steps until all Inputs are added and adjusted.
Add Input
1. Click on the Input tab to select the inputs that will be de fi ned.
2. Click on the +Add Input blue button to enter the Add mode.
3. Click on the connector that the input signal is connected to de fi ne it as an input.
4. Click on the Done Adding button to exit the Add mode.
(Optional) Edit the Name
1. Double click on default name in the Name list to edit the name.
2. When the area turns blue, click the eraser icon to clear the fi eld.
3. Type a new name.
(Optional) Adjust Input Parameters
Click on the Adjust tab that is located on the top. From this menu you can adjust:
1. Select Format value, color space and connector type. Default value is 1920x1080p @ 59.94.
2. Select EDID format (for DVI, HDMI and DisplayPort inputs).
3. Select HDCP mode (for DVI, HDMI and DisplayPort inputs).
4. Select color space, capacity and type (for SDI inputs).
5. Perform color adjustments.
6. Read all timing parameters associated with the selected format.
(Optional) Auto create Inputs
If the Auto create Inputs is pressed, then the software will add all unassigned inputs to the input list and number them sequentially.
This button is a shortcut for systems utilizing a large number of inputs.
(Optional) Delete Inputs
1. Click on the blue button Delete Input(s) .
2. From the Name list click on the “ x ” space next to the Input(s) you wish to delete.
3. Hit the red button Delete Input(s) button. All of the selected Inputs will be removed from the list.
R5905948 E2 12/12/2014 169