Page 48
Dispense Log Message Code:
“Code 04”
Successful Dispense Job
Interpretation:
The job was successfully completd
and logged in job history storage.
Step 1:
Not an error, remedial action is not
required.
Dispense Log Message Code:
“Code 20”
“Powered Off, Job Suspended”
Interpretation:
Power has been turned OFF by the
console operator, or loss of supply
power has occurred, with pending
jobs discontinued.
Step 1:
Select “continue jobs?, Yes” when
console power is restored to com-
plete the unfi nished dispenses.
Dispense Log Message Code:
“Code 21”
“Powered Off, No Active Jobs”
Interpretation:
The system was powered off with no
dispense jobs pending.
Step 1:
Not an error, remedial action is not
required.
Dispense Log Message Code:
“Code 24”
“History Log Cleared”
Interpretation:
The job history log has been cleared,
usually due to console initialization
and reprogramming for a new setup.
Step 1:
Not an error, remedial action is not
required.
Diagnostic:
Non-Fault Codes and Messsages
Dispense Log Message Code:
“Code 06”
Job Time Out
Interpretation:
The dispense job has been deleted
due to the 90-minute time-out limit.
Step 1:
Re-enter the deleted job and dis-
pense, if required.
Dispense Log Message Code:
“Code 09”
Queue Deletion
Interpretation:
The dispense job was deleted from
queue by the console operator.
Step 1:
Not an error, remedial action is not
required.
Dispense Log Message Code:
“Code 50”
“System Powered On”
Interpretation:
The systems completed a power-on
and self test.
Step 1:
Not an error, remedial action is not
required.
Dispense Log Message Code:
“Code 52”
“Fluid Low Level Alarm”
Interpretation:
A fl uid low level alarm was triggered.
Prompting message only, no intru-
sion on normal operation.
Step 1:
Refill Tank and use Tank Refilling
Procedure
[Procedure BP6, page 32]
to record transaction.
Dispense Log Message Code:
“Code 05”
Job Killed
Interpretation:
A dispense job in queue was discon-
tinued by the operator.
Step 1:
Not an error, remedial action is not
required.
