Page 37
SP2: Fluid
Identifi cation
SPECTRUM 100
IDLE
3 KEYS
A
SET-UP FUNCTION: ?
FLUID IDENTIFICATION
ENTER
REQUIRED ACTIVITY: ?
SET-UP
ENTER
Special Procedure
SP2: Fluid Identifi cation
SCROLL
PIN#
FLUID IDENTIFICATION
SC IDENTIFICATION
COMM PORT SELECT
TIME/DATE
SYSTEM CONFIG..
EXIT
SCROLL
TANK REFILL
SET-UP
INVENTORY STATUS
DISPENSE LOG
SYSTEM TEST
EXIT
NUMBER OF FLUIDS ?
2
ENTER
ENTER
1
,
2
,
3, 4
NEXT
PAGE
FLUID # 1 TYPE ?
10W30
ENTER
SCROLL
5W20, 5W30
10W30
, 10W40
15W40, ATF
FLUID 1
FLUID 2
1
Begin with the program at home position:
“SPECTRUM 100, IDLE”. Press the three-
key simultaneous entry for management rou-
tines (“NEW”+”ENTER”+”STATUS”)
2
The next prompt will ask you to choose
the required management activity:
“SCROLL” to select “SET-UP”, then press
“ENTER”.
3
The next prompt will ask you to select
a type of set-up activity: “SCROLL” to
select “FLUID IDENTIFICATION”, then press
“ENTER”.
4
Next, the display will ask for the number
of fl uids to be used. Use number keys
to place or edit the correct numerical value,
which corresponds to the number of Spec-
trum impulse meters to be used in the pump
room,
then press “ENTER” to continue.
6
Next, select the correct fl uid type for the
displayed fl uid number by scrolling right
or left. Stop when the correct fl uid type is
highlighted.
Select the default “FLUID 1”,
“FLUID 2” etc., if your fl uid type does not
appear on the scroll list.
Then press “ENTER”
to continue.
CONFIGURE FOR EXPANSION ?
YES no
ENTER
SELECT
yes, no
5
If you selected 1 or 2 fl uids, the next
screen allows use of the “EXPANSION
CONFIGURATION” setup option. Choose
“Yes” to confi gure the system to use one
smart controller per station; Choose “No” to
confi gure for use of the minimum number of
smart controllers, where users do not intend
to add more fl uids at a later date. This choice
should match the “SYSTEM CONFIGURA-
TION WORKSHEET” for the installation. If
you choose future expansion, the program
will automatically enter dummy tank and fl uid
information for fl uid 3. This may be edited if
and when the user eventually adds the third
system fl uid.