Page 42
Special Procedure
SP5: Set Time/Date
SP5: Set
Time/Date
SCROLL
TANK REFILL
SET-UP
INVENTORY STATUS
DISPENSE LOG
SYSTEM TEST
EXIT
SCROLL
PIN#
FLUID IDENTIFICATION
SC IDENTIFICATION
COMM PORT SELECT
TIME/DATE
SYSTEM CONFIG..
EXIT
SPECTRUM 100
IDLE
3 KEYS
TIME 12.03 PM
DATE 08-29-2002
ENTER
SET-UP FUNCTION: ?
>> TIME/DATE
ENTER
SPECTRUM 100
IDLE
REQUIRED ACTIVITY: ?
>> SET-UP
ENTER
SET-UP FUNCTION: ?
TIME/DATE >> EXIT
ENTER
REQUIRED ACTIVITY: ?
>> EXIT
ENTER
SCROLL
TANK REFILL
SET-UP
INVENTORY STATUS
DISPENSE LOG
SYSTEM TEST
EXIT
SCROLL
PIN#
FLUID IDENTIFICATION
SC IDENTIFICATION
COMM PORT SELECT
TIME/DATE
SYSTEM CONFIG..
EXIT
EDIT VALUE:
1
Begin with the program at home position:
“SPECTRUM 100, IDLE”. Press the three-
key simultaneous entry for management rou-
tines (“NEW”+”ENTER”+”STATUS”)
2
The next prompt will ask you to choose
the required management activity:
“SCROLL” to highlight “SET-UP”, then press
“ENTER”.
3
The next prompt will ask you to select a
type of set-up activity: “SCROLL” to high-
light “TIME/DATE”, then press “ENTER”.
4
The display will then display the current
time and date, as stored in processor
memory. “SCROLL” and text edit the time
and date entries to obtain corrected values.
Press “ENTER” to load these corrected
values when editing is completed.
5
The next prompt will ask you to select
a type of set-up activity: “SCROLL” to
highlight “EXIT”, then press “ENTER”.
6
The next prompt will ask you to choose
the required management activity:
“SCROLL” to highlight “EXIT”, then press
“ENTER”.
7
Next, the system will display “SPEC-
TRUM 100 IDLE”. The console is now
ready for other operations.
