Page 39
SP3:
Smart Controller
Identifi cation
SPECTRUM 100
IDLE
3 KEYS
STA: 00
SC 00 PORTS USED: 1234
SCROLL
STA: 01
SC 01 PORTS USED: 1234
END WITH SC#:?
16
ENTER
SET-UP FUNCTION: ?
SC IDENTIFICATION
ENTER
START WITH SC#:?
00
ENTER
NEXT
PAGE
REQUIRED ACTIVITY: ?
SET-UP
ENTER
Special Procedure
SP3: SC Identifi cation
SCROLL
PIN#
FLUID IDENTIFICATION
SC IDENTIFICATION
COMM PORT SELECT
TIME/DATE...
EXIT
SCROLL
TANK REFILL
SET-UP
INVENTORY STATUS
DISPENSE LOG
SYSTEM TEST
EXIT
EDIT VALUE:
EDIT VALUE:
EDIT: TOGGLE #KEYS
(1,2,3,4)
SCROLL RIGHT
ENTER QUICK LUBE STATION
00
ENTER
EDIT VALUE:
1
Begin with the program at home position:
“SPECTRUM 100, IDLE”. Press the three-
key simultaneous entry for management rou-
tines (“NEW”+”ENTER”+”STATUS”)
2
The next prompt will ask you to choose
the required management activity:
“SCROLL” to highlight “SET-UP”, then press
“ENTER”.
3
The next prompt will ask you to select
a type of set-up activity: “SCROLL” to
highlight “SC IDENTIFICATION”, then press
“ENTER”.
4
Next, identify the starting fl uid controller
number by text-editing the number on
line 2. This should be “00” for a new system
and “00” must be the SC used for the air
solenoids. Then press “ENTER” to continue.
5
Next, identify the fi nal fl uid controller
number in the system by text-editing the
number on line 2. Then press “ENTER” to
continue.
6
Next, if you want a priority quick lube
station, edit number to show the station.
Use “00” if you do not want this option. Then
press “ENTER” to continue.
7
Next, a series of screens will prompt you
to identify the valve ports which are to be
not used
at each station.
Begin with Sta-
tion 00
:
if
you have two system fl uids
and
you selected future expansion in procedure
SP2, then “turn off” port 3 by pressing the “3”
key;
if
you have one system fl uid
and
you
selected future expansion in procedure SP2,
then “turn off” port 2 and port 3. If you did
not select future expansion, then
make no
changes
to ports at Station 00. Right-scroll
one time to see the next station. For stations
01 and higher, use number keys to toggle the
numbers “1234”
off
wherever specifi c dis-
pense ports will
not
be used. Proceed sim-
ilarly until inactive ports at all stations are
correctly “turned off”.
SCROLL
EDIT: TOGGLE #KEYS
(1,2,3,4)
SCROLL RIGHT
