Page 25
Operation:
Guide to Basic Procedures (BP)
Nine console procedures are used to control dispense
operations and manage jobs in queue, to review
and maintain tank level information, and to inspect
job history:
General Access Procedures
(All PIN numbers may use these procedures.)
BP1
[page 27]
Co
nsole Power-Up
... at the
beginning of each working day, the
console power switch should be turned “ON”. This
will initiate an electronic self-testing cycle, which will
last approximately 3 to 20 seconds. When the cycle
is complete, the console display will show the default
message “SPECTRUM 100, IDLE”. Or, the console
program will request a PIN number to proceed, if
you have set up the system for PIN code protection
(see page 24 for details). If requested, respond
with any valid PIN number to continue. If error
messages appear at start-up, refer to the “PROBLEM
DIAGNOSTICS” section of this manual, pages
52-58.
BP2
[page 28]
Auth
orize a New Dispense
Job
... in the Spectrum
TM
system, all fl uid
dispensing jobs must be initiated at the console. With
the console display at “SPECTRUM 50, IDLE”, press
the “NEW” key to begin a new job authorization.
BP3
[page 29]
Review the Status of Undis-
pensed Jobs
... at any time, the status of
all authorized, undispensed jobs may be reviewed.
Press the “STATUS” key to access the job summary
quick-view screens, which are organized by fl uid type.
Right-scroll to see jobs in queue, represented by Q0
(the active job), Q1, Q2, ...etc.
BP4
[page 30]
Changing the Job Queue
Order
... at any time, an authorized job
waiting in queue may be jumped forward for immediate
dispensing. All other jobs will move back one space
in the queue.
BP5
[page 31]
Deleting a Job from Queue
...
at any time, an authorized job ready for
immediate dispense (queue position Q0) may be
deleted. All other jobs in queue will move forward
one step.
Management Access Procedures
(Under some system set-up conditions, only management
PIN numbers may use these procedures. Refer to “UNDER-
STANDING PIN CODES” page 24.)
BP6
[page 32]
Adding Fluid to Tanks
... at any
time, a Spectrum
TM
manager may record
fl uid additions made to any tank, in gallon units.
BP7
[page 33]
Checking Tank Inventory
Status
... at any time, a Spectrum
TM
manager may review the status of all fl uid reservoirs.
BP8
[page 34]
Looking at the Dispense
Log
... at any time, a Spectrum
TM
manager
may review a dispense history log, which records
the total amount of each fl uid dispensed by day or
by month.
BP9
[page 35]
Adding or Editing PIN Num-
bers
... at any time, a Spectrum
TM
man-
ager may add new PIN numbers or edit existing ones
(up to a maximum of 37 PIN numbers).
