Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 133 / 174

AquaTrans™ AT600 User’s manual 123
Chapter 6. Communication
Table 145: Command-specific response codes for read Reynolds KFactor table
Command 216 (0xD8): Write calibration configuration
This command is to write calibration configuration.
Table 146: Request data bytes for write calibration configuration
Table 147: Response data bytes for write calibration configuration
Code Class Description
0 Success No command-specific errors
1 Undefined
2 Error Invalid selection
3 - 4 Undefined
5 Error Too few data bytes received
6 Error Device-specific command error
7 - 127 Undefined
Byte Format Description
0 Unsigned-8 Reynolds correction:
0: Disable,
1: Enable
1 Unsigned-8 Active MultiK Enable:
0: Disable,
1: Enable
2 Unsigned-8 KFactor type:
0: Velocity,
1: Reynolds
3 - 6 Float Static KFactor
7 Unsigned-8 KFactor points
8 - 11 Float Kinematic viscosity
Byte Format Description
0 Unsigned-8 Reynolds correction
1 Unsigned-8 Active MultiK enable
2 Unsigned-8 KFactor type:
0: Velocity,
1: Reynolds
3 - 6 Float Static KFactor
7 Unsigned-8 KFactor points
8 - 11 Float Kinematic viscosity