Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 48 / 174

Chapter 4. Initial setup and programming
38 AquaTrans™ AT600 User’s manual
4.5.2 Units setting
Note: Velocity is shown here as a typical example.
To check or change the date/time,
highlight system date and press [√].
The following screen opens.
Use the [

] or [

] key to select a
specific digit, then use the [

] or [

]
key to change that digit as required.
After all digits are correct, press [√]
to save. Then, press [x] to return to
the previous screen.
To check or change velocity flow
units, use the [

] or [

] arrow key to
select units setting and press [√].
The following screen opens.
Under units setting menu, use the
[

] or [

] arrow key to select the
unit that need to be changed and
press [√] to open the following
screen.
If no change is desired, press [x]
twice to return to the units setting
menu. To change the
measurement system, select the
desired option, press [√] twice to
open a screen similar to the
following.
If no change is desired, press [x]
twice to return to the units setting
menu. To change the
measurement system, select the
desired option, press [√] twice to
open a screen similar to the
following.