Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 42 / 174

Chapter 4. Initial setup and programming
32 AquaTrans™ AT600 User’s manual
To change the totalizer measurement type, proceed as follows:
From the display screen, press either the [

] or
[

] keys until the value is highlighted.
After the value is highlighted, press [√] to open
the display/decimal option.
Use the [

] and [

] keys to scroll to the desired
number of decimal places. (Available options
include 0, 1, 2, 3, 4, and Sci (Scientific Notation).
Press [√] to select the value, and then press [√]
again to confirm the selection or [ ? ] to cancel
the selection.
From the display screen, press either the [

] or [

] keys
until the measurement type is highlighted.
After the type is highlighted, press [√] to open the
display/decimal option.
The screen changes to totalizer type. Press the [

] and
[

] keys to scroll to the desired parameter. Available
parameters include: forward totals, reverse totals, net
totals and time. After you have chosen the type, press
[√] to select the value, and then press [√] again to
confirm the selection or [x] to cancel the selection.