Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 52 / 174

Chapter 4. Initial setup and programming
42 AquaTrans™ AT600 User’s manual
4.6.1.1 Setting the analog measurements
4.6.1.2 Setting the base value and the full value
Note:
The units shown are the units selected in the units setting menu.
Select the desired output with the [

] or [

]
arrow keys, and press [√] to enter the
configuration menu.
Select the desired output with the [

] or [

] arrow
keys, and press [√] to enter the configuration
menu.
Select measurement and press [√]. The following
screen opens.
In the measurement menu, select the type of
analog output to be used, and press [√] to return
to the previous screen.
Base value is the flow rate represented by a 4 mA
output signal, and full value is the flow rate
represented by a 20 mA output signal. In the
analog output menu, select base value or full
value and press [√]. A screen similar to the
following opens.
Press [√] again and a screen similar to the
following opens.