Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 71 / 174

AquaTrans™ AT600 User’s manual 61
Chapter 4. Initial setup and programming
4.7.4.3 Setting the pipe lining
Note:
The units shown are the units selected in the units setting menu
In the pipe menu, select lining and press
[√]. The following screen opens.
If there is no lining in your pipe, select no
and press [√] to return to the previous
screen. If your pipe does have a lining,
select yes and press [√] twice. A screen
similar to the following opens.
To set the lining thickness, select lining
thickness and press [√]. A screen similar
to the following opens.
Press [√] again, and a screen similar to
the following opens.
Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that digit as
required. After all digits are correct, press [√] to
save. Then, press [x] to return to the previous
screen.
Select lining material and press [√], then select
the appropriate option and press [√]. If your pipe
material is not listed (see table 4 below for the
available options), select other and press [√]
twice. A screen similar to the following opens.