Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 64 / 174

Chapter 4. Initial setup and programming
54 AquaTrans™ AT600 User’s manual
Selecting the bits/parity
Press [√] again, and a screen similar to the following
opens.
The default address is 1, but 1 to 254 are the acceptable
values. Use the [

] or [

] key to select a specific digit,
then use the [

] or [

] key to change that digit as
required. After all digits are correct, press [√] to save.
Then, press [x] to return to the previous screen.
To set the bits/parity, select bits/parity and
press [√]. A screen similar to the following
opens.
The default bits/parity is 8/none. Select the
desired setting and press [√] to return to
the previous screen.
The default stop bits is 1. To set the stop
bits, select stop bits and press [√]. A
screen similar to the following opens.
Select the desired setting and press [√] to
return to the previous screen.