Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 47 / 174

AquaTrans™ AT600 User’s manual 37
Chapter 4. Initial setup and programming
4.4.4.1 Program review
The program review menu requires no user password. However, it provides view-only access to the information. To
change any setting or parameter, you must enter the program menu by entering a valid password.
4.4.4.2 Program
IMPORTANT: When you enter program (configure) mode, measurements stop and the output goes to error level.
Note:
The default password is 1111.
4.5 User preferences
4.5.1 Setting
Note:
You can only change the meter tag and label data using Panametrics’ Vitality software.
To enter the programming
menu, on the display menu use
the arrow keys to highlight
program and press [√]. The
following screen opens.
Use the [

] or [

] key to select a
specific digit, then use the [

] or
[

] key to change that digit as
required. After all digits are
correct, press [√] to open the
user preference screen
To check or change the desired
settings, under user preference, select
settings and press [√]. The following
screen opens.
To check the meter tag and/or Label,
highlight your choice on the setting
menu and press [√]. Press [x] to return
to the previous screen.