Baker Hughes Panametrics AquaTrans AT600, Руководство пользователя

Страница: 58 / 174

Chapter 4. Initial setup and programming
48 AquaTrans™ AT600 User’s manual
Setting measurement type
Setting the base value, full value, and frequency
Note:
Use the same steps to program the base value, full value and full frequency.
Note:
The units shown are the units selected in the units setting menu.
Select measurement and press [√] to open a
screen similar to the following.
In the measurement menu, select the type of
analog output to be used and press [√] to
return to the previous screen.
The base value is the measurement that corresponds to a 0 Hz
pulse. The full value is the measurement value that corresponds
to a full frequency pulse. The full frequency is the maximum
frequency used for the output pulse, and it indicates the
maximum flow rate measurement.
Use the [

] or [

] arrow keys to select the appropriate option
and press[√]. A screen similar to the following opens.
To change the existing number, press [√]
and a screen similar to the following opens.
Use the [

] or [

] key to select a specific
digit, then use the [

] or [

] key to change
that digit as required. After all digits are
correct, press [√] to save. Then, press [x] to
return to the previous screen.