B. Braun OUTLOOK ES Series, Руководство оператора

Страница: 83 / 134

Chapter 8: DoseCom™
951128 Rev E (11/10)
75
sequential delivery. Changes in rate or dose could be an indication of a titration. Titration
checking provides a means to confirm the proper rate or dose for the titrated medication. The
process is completed as follows:
1. Transmit the infusion data to the pump as described in the previous sections.
2. Enter a valid, non-zero value for rate or dose if applicable.
3. Validate the transmitted infusion data by moving the Cursor to Accept and press .
4. The titration checking routine commences as follows:
For Standard Mode Deliveries
• If the Patient ID and Drug Name match the previous infusion information, the rate
value is compared.
• If the rate values are equal, the rate and
VTBD are displayed as transmitted and the
infusion can be started by pressing
.
• If the rate values are not equal, the following
Titration Alert will be displayed:
1. Use the to highlight the cor-
rect rate, then press .
2. Begin the infusion by pressing .
For Dose Mode Deliveries
• If the Patient ID, Drug Name, Dose units, and Drug Concentration match the previous
infusion information, the dose value is compared.
• If the dose values are equal, the infusion
information is displayed and the infusion can
be started by pressing
.
• If the dose values are not equal, the following
Titration Alert will be displayed:
1. Use the to highlight the cor-
rect dose, then press .
2. Begin the infusion by pressing .