manualshive.com logo in svg

B. Braun OUTLOOK ES Series, Руководство оператора

Поделиться
Скачать
B. Braun OUTLOOK ES Series Скачать руководство пользователя страница 26

O

UTLOOK

® 

 

ES

 

O

PERATOR

’

S

 M

ANUAL

18

951128 Rev E (11/10)

INFORMATION SCREEN

During an infusion, the Information Screen may display one or more lines of data specific to 
the infusion.  The lines of data displayed are dependent on the Delivery Mode and are 
described in the individual sections for each Mode. 

Time Left

This displays the hours and minutes required to infuse the volume to be delivered at the 
current rate. As the rate and volume to be delivered are changed, the 

Time Left

 will be 

recalculated. 

N

OTE

: If the 

Time Left

 is greater than 99 hours and 59 minutes, the 

Information Screen will not display the Time Left =. 

Total Infused

This displays the total volume infused in milliliters since the 

Total Infused

 value was last 

cleared. The Total Infused may be cleared while the pump is running. To clear the Total 
Infused, see “Clear Total Infused” in Chapter 12: Options.

Occlusion Limit

This displays the current Occlusion Limit setting. To change this setting see “Occlusion 
Limit” in Chapter 12: Options.

Dose

This displays the current dose value with associated units.  To change the current dose, see 
”Changing DOSE Mode Rate” in Chapter 5: DOSE Mode.

DoseGuard

TM

 Limits

In DOSE Mode, this display indicates the maximum and minimum dosage values assigned 
to the current drug.  Soft Limits will be displayed above the ends of the green indicator bar 
and Hard limits, if assigned, will be displayed below the ends of the yellow indicator bar.  
If no DoseGuard limits have been established, a white bar will appear in the with the 
words “No Limits” displayed. If no hard 

MIN

 and 

MAX

 values have been programmed only 

the green indicator bar with associated soft limit values will be displayed.

Содержание OUTLOOK ES Series







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды