B. Braun OUTLOOK ES Series, Руководство оператора

Страница: 75 / 134

Chapter 7: DoseScan™
951128 Rev E (11/10)
67
rized User ID has been validated the infusion will automatically start.
Note: The Run Authorization Scan has an “Override” option that
will allow the user to begin the infusion without scanning their
Authorized User ID. This option is for those emergency cases
where the Authorized User ID may not be readily accessible.
Note: “Override” events are logged in the Operations Log of the
infusion device.
The following Scan Features are activated per Drug and/or Solution using the Outlook ES
Pump Configuration Editor. For additional information on how to configure drugs and
solutions for these options, refer to the Instructions for Use guide that accompanies the
application.
DoseGuard TM Override Scan
The DoseGuard Override Scan is a drug specific, Care Area specific scan configuration.
This option can be enabled for a specific drug in one or more Care Areas. For example,
you may choose to not activate this option for DOPamine in the ICU Care Area, but you
may want additional authorization to override the dose limits for DOPamine used in the
MED SURG Care Area. If activated for a particular drug, the user will be prompted to
scan their Authorized User ID when they override hospital defined dose limits.
Note: DoseGuard Override scans are logged in the Operations Log
of the infusion device.
Note: Exiting the DoseGuard Override Scan prompt will invalidate
the override and return the user to the previous delivery
parameters.
Note: Three invalid scans will also invalidate the override and
return the user to the previous delivery parameters.