B. Braun OUTLOOK ES Series, Руководство оператора

Страница: 113 / 134

Chapter 12: Options
951128 Rev E (11/10)
105
1. Press to stop the infusion.
2. Press .
3. Use the to highlight “
Micro Rate/Limit
,”
then press .
4. Use the to highlight “
ON
.”
5. Use the down to highlight the
Rate Limit
field.
6. Use the keys to enter the maximum rate the pump will be allowed to run.
N
OTE
: If a rate currently exists in a mode that is higher than the
Micro Rate/Limit set, an audible signal occurs. The user will need
to either exit Micro Rate/Limit and lower the offending rate, or
increase the Micro Rate/Limit.
7. Press . will appear in the upper left corner of the Information Display.
To Exit Micro Rate/Limit
1. Press menu.
2. Use the to highlight “
Micro Rate/Limit
,” then press .
3. Use the to highlight “
OFF
,” then press .
HOLD EXTENDER
Hold Extender allows the user to pause the infusion for up to 2 hours. Once the timer goes
down to zero, the pump will alarm to notify the user the infusion must either be started or put
on hold again.
1. Press to stop the infusion.
2. Press again. This will put the pump on hold
for 3 minutes. Each additional press of will
add another 3 minutes onto the Delay time.
OR
1. Press .