manualshive.com logo in svg

B. Braun OUTLOOK ES Series, Руководство оператора

Поделиться
Скачать
B. Braun OUTLOOK ES Series Скачать руководство пользователя страница 68

O

UTLOOK

® 

 

ES

 

O

PERATOR

’

S

 M

ANUAL

60

951128 Rev E (11/10)

DOSEGUARD

TM

 MATCHING

The DoseScan

TM

 feature provides the clinician the ability to assign DoseGuard

TM

 dose limits 

to scanned medications. For more information on DoseGuard, refer to “DoseGuard™ in 
DOSE Mode” on page 40.

If the DoseGuard Matching feature is turned ON under DoseScan options in the BIOMED 
menu, scanned medications will be compared with those medications configured in the drug 
library. If DoseGuards are assigned to those medications, the dose limits or Care Areas will be 
displayed for selection and assignment.

If the scanned solution is not contained in the drug 
library or there are no DoseGuards assigned, the 
following screen will be displayed.

• Choosing “

Accept

” will accept the scanned 

data without DoseGuard protection. 

• Choosing “

Exit

” will reject all the scanned 

data.

If, however, the scanned drug matches the name, concentration and dose units of a medication 
configured in the drug library, one of the following notification messages will be displayed.

This message will be displayed if the scanned drug 
matches a medication in a configured Care Area.

Содержание OUTLOOK ES Series







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды