manualshive.com logo in svg

B. Braun OUTLOOK ES Series, Руководство оператора

Поделиться
Скачать
B. Braun OUTLOOK ES Series Скачать руководство пользователя страница 22

O

UTLOOK

® 

 

ES

 

O

PERATOR

’

S

 M

ANUAL

14

951128 Rev E (11/10)

5. Close the door of the pump.
6. Open the roller clamp on the tubing.

N

OTE

: Do not use a pump with visible damage or with bent, 

damaged, or missing components.

UNLOADING THE TUBING

1. Press 

 

to stop the infusion.

2. Close the roller clamp on the tubing.
3. Open the pump door.
4. Grasp the tubing on the left hand side of the pump. 
5. Grasp and gently pull the Free Flow Protection Clip from the Free Flow Protection Clip 

Receptacle while also pulling the tubing/cassette from the pump. Removing the Free Flow 
Protection Clip in this manner will automatically stop the flow of fluid in the tubing.

6. If gravity infusion is desired, close the roller clamp, open the Free Flow Protection Clip, 

and adjust the flow with the roller clamp.

TURNING OFF THE PUMP

The Outlook® ES must be stopped before turning the device off.

1. Press 

 to stop current infusion.

2. Press . 

To Purchase, Visit 

Avobus.com

 or call 

1-800-674-3655

Содержание OUTLOOK ES Series







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды