manualshive.com logo in svg

B. Braun OUTLOOK ES Series, Руководство оператора, Страница: 111 / 134

Поделиться
Скачать
B. Braun OUTLOOK ES Series Скачать руководство пользователя страница 111

Chapter 12: Options

951128 Rev E (11/10)

103

TO CHANGE THE START TIME

N

OTE

: The time is displayed in military time. Use 00:00 to represent 

midnight and 12:00 to represent noon.

1. Use the 

 to highlight 

Start at

 fields.

2. Use the 

 keys to change the start time.

3. Use the 

 to highlight “

ACCEPT XX

H

  XX

M

 DELAY

”, then press 

.

The information is displayed on the Information Screen, “Delay” is shown, and the yellow 

Hold LED will blink.   Press 

 to cancel Schedule Next RUN. 

CHECK BATTERY LEVEL

Two states of the battery are possible: discharging or charging.  Prior to unplugging the pump 
for transport purposes, this feature makes determining charge level of the battery easy.

1. Press . 

2. Use the 

 to highlight “

Check Battery Level

,” then press 

.

The screen display will provide information as to which state the pump is in and indicate if the 
pump is operating on the internal battery. An example is shown below:

•

DISCHARGING

: The pump is unplugged and running on battery.

•

CHARGING

: The pump is plugged in and the battery is charging.

Содержание OUTLOOK ES Series







































































































































Отзывы:

Нет отзывов