manualshive.com logo in svg

B. Braun OUTLOOK ES Series, Руководство оператора

Поделиться
Скачать
B. Braun OUTLOOK ES Series Скачать руководство пользователя страница 70

O

UTLOOK

® 

 

ES

 

O

PERATOR

’

S

 M

ANUAL

62

951128 Rev E (11/10)

Multiple Care Area Match

If the scanned drug matches a medication con-
figured in multiple Care Areas, the Care Areas 
will be displayed for viewing and selection. A 
screen similar to the one shown will be dis-
played.  

• Use the 

 to highlight the appropriate 

Care Area.

•  Press 

 to review the Dose limits.

Once a Care Area is selected, the clinician has 
the ability to “

Accept

” or “

Exit

” as described in 

the Single Care Area Match. 

The clinician also has the option to go “

Back

” to 

choose another Care Area to review alternate 
dose limits as shown in the example screen.

N

OTE

: The pump will transition into the KVO state when the infusion 

has been completed.  Pressing HOLD to silence the KVO alarm will 
deactivate the drug name display if no DoseGuard

TM

 match exists 

or if no DoseGuard limits have been assigned to the scanned 
medication.

RATEGUARD

TM

 MATCHING

DoseScan feature provides the clinician the ability to assign RateGuard

TM

 rate limits to 

scanned medications. For more information on RateGuard, refer to “DoseGuard™ in DOSE 
Mode” on page 40.

If the RateGuard Matching feature is turned ON under DoseScan options in the BIOMED 
menu, scanned medications will be compared with those medications configured in the 
solution list.   If RateGuards are assigned to those solutions, the rate limits or Care Areas  will 
be displayed for selection and assignment.

To Purchase, Visit 

Avobus.com

 or call 

1-800-674-3655

Содержание OUTLOOK ES Series







































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды