B. Braun OUTLOOK ES Series, Руководство оператора

Страница: 45 / 134

Chapter 5: DOSE Mode
951128 Rev E (11/10)
37
If this is a new pump or a pump recently
serviced by Biomedical Services,
a screen similar
to the following may appear.
1. Use the to highlight “
DRUG,
” then press
.
2. Follows steps 2-4 in To Change To A Differ-
ent Drug
above, then press .
3. See “
DOSE DATA ENTRY SCREEN
.”
DOSE DATA ENTRY SCREEN
The DOSE DATA ENTRY SCREEN is the “worksheet” into which the dosing parameters are
entered. The fields to be completed will include concentration, dose and units, rate, and may
include height and/or weight. All fields may be changed when this screen is active.
N
OTE
: Concentration, dose, and rate are dependent on each other
for their numeric values. Specifying the amount of two of the
parameters causes the third parameter to be calculated.
1. Use the to highlight the field to be completed.
2. Use the keys to enter data.
3. Press key to move to the next field.
Example:
Specifying a weight of 70 kg, a concentration
of 400 mg of DOPamine in 250 ml of fluid at
a dose of 10.0 mcg/kg/min results in a calcu-
lated rate of 26.3 ml/hr.
4. Use the to highlight “
ACCEPT
,” then
press .
5. Press
PRIMARY
to begin the infusion.
N
OTE
: Pressing HOLD in the Dose Data Entry screen will generate
a pop up message that will allow the user to “start over” and/or
return the pump to the last accepted infusion parameters.