© 2009 Austin Kontore LLC
Page 26 of 54
Return to the previous side and drill the next hole. It will
be about 1 ¼” off the ground.
Important:
When you are drilling these holes, avoid
placing them directly in the middle. The center of the
Core Square needs to remain clear, as additional screws
will be added later (to fasten the Door Rails).
Pre-drill the adjacent hole, about ¾” from the ground.
Goal:
The holes are staggered so that the screws do
not “run into” each other while you are fastening them.
Fasten the Post to the corner of the Core Square with
one 1 5/8” screw.
On the adjacent side, fasten the Post to the corner of
the Core Square with one 1 5/8” screw.
The post will now be secured with (4) 1 5/8” screws.
REPEAT
the process for the other (3) 2” x 2” x 4’
Posts and the remaining (12) 1 5/8” screws.
Goal:
The end result will be four Posts attached to
the Base Core Square. This is coop’s foundation.
