© 2009 Austin Kontore LLC
Page 25 of 54
Fasten the Post to the corner of the Core Square with one
1 5/8” screw.
Important:
Make sure to hold the Post tightly to the
inside corner while fastening the screw, and don’t allow it
to go out of plumb. A helper will make this process easier.
On the adjacent corner (still working with the first Post),
drill a hole about 1 ¼” from the top of the Core Square.
The hole should be approximately 1 ½” deep and go
through the Core and into the Post.
Fasten the Post to the corner of the Core Square with one
1 5/8” screw.
At this point you will have two 1 5/8” screws in place.
