ATEN VK2100, Руководство пользователя

Страница: 58 / 127

ATEN Control System User Manual
48
„ I/O
Two drop-down menus appear for Input (VDC) ports: Lower Threshold and
Upper Threshold . Set the thresholds according to the hardware device you are
connecting and then configure a Monitor (see page 76).
„
Ethernet
These options allow you to configure the settings for a PJLINK or TELNET
LAN device. End Character : enter characters in a telnet return message to
mark the spot where the message should stop. Words before the End Characters
will be included and words after it will be cut off in the return message.
Use the Protocol Type drop-down menu to select:
Š
TELNET – allows control of a LAN device via telnet commands. Enter
the IP Address , Port , Username and Password of the telnet controlled
LAN device.
Š PJLINK – allows control of data projectors over a network using the
PJLink protocol. Enter the IP address , Port and Password of the LAN
projector or device used to control the projector.
„ VK2100
When you select a VK2100 controller from the left side bar, the properties
provides a drop-down menu to set the Controller ID. See
Controller ID ,
page 44, for details.