ATEN VK2100, Руководство пользователя

Страница: 54 / 127

ATEN Control System User Manual
44
Project Information
The Project Information tab allows you to enter details about the installation to
start the project. Enter the information using the table below as a guide.
Project Name Enter the name of the project you are setting up. You can create
multiple projects but for most installations only one project is
required.
Controller ID Displays the Controller ID for the controller in the project. Use the
Controller ID in the project to set the
Controller ID Switch on the
rear of the VK2100.This tells the software which VK2100 to upload
the device configuration and viewer profile information to.
ATEN Controller
Type Select the controller model you are installing.
Number of Rooms Enter the number of rooms the VK2100 will control. When a viewer
profile is created in Create Viewer & Design, you need to select the
Accessible Room which will associate the profile to a controller via
the room number. This link allows the software to know which
controller to upload the viewer profile to.
Name Enter the client name associated with the project.
Address Enter the client address associated with the project.
Phone Enter the client phone number associated with the project.
Add Controller Click to add controllers* to the project. The number of controllers
added should equal the number of VK2100 units being installed. A
project can have up to 16 controllers.
*A controller is the software’s link to the VK2100 being installed.
Remove Controller Click to delete a controller from the project.
Start Project
Click to begin configuring hardware devices. The Select Device &
Configuration tab will open.