ATEN VK2100, Руководство пользователя

Страница: 89 / 127

Chapter 5. ATEN Configurator (VK6000)
79
9. First select the hardware under Devices .
If you select a VK2100, you can add special actions and double-click
on them in the
Action List box to configure:
Delay – adds a delay in seconds. Enter a number between 0.1-180.
Relay – adds an Open, Close, Toggle or Pulse action on the selected
controller and Relay port.
D/O – adds an Open, Close, Toggle or Pulse action on the selected
controller and Digital Output port.
Serial Raw (ASCII) – adds a serial command string that is entered
for the port selected in ASCII mode.
Serial Raw (HEX) – adds a serial command string that is entered for
the port selected in HEX mode.
Telnet Raw (ASCII) – adds a telnet command string that is entered
for the port selected in ASCII mode.
10. From the Function list, double-click an action to add it to the Action List .
This is the Action that initiates when the Condition is met.
11. You can also add a Macro , Link , Set Flag or Condition .
12. After adding all the functions to the Action List , the monitor is complete.