ATEN VK2100, Руководство пользователя

Страница: 57 / 127

Chapter 5. ATEN Configurator (VK6000)
47
Properties
The Properties displays information about the selected device. The
information available depends on the device or port selected. The table below
describes information shown for all types, followed by sections for types that
include additional options.
„
Serial
Provides drop-down menus to configure the Baud Rate , Databit , Stopbit ,
Parity and Flow Control settings. Configure these options to match the serial
device settings. End Character : enter characters in a telnet return message to
mark the spot where the message should stop. Words before the End Characters
will be included and words after it will be cut off in the return message.
Name Displays the device name and allows you to edit it.
Device Type Displays the device of the selected device.
Brand Displays the brand of the selected device.
Model Displays the model of the selected device.
Version Shows the firmware version selected for the device. Use the drop-
down menu to select a different firmware version. Click the menu
box next to the version number to open a PDF with the version
history. The version history and different versions for a device can
be manually added/updated via the Database Generator (see step
3 of
Edit / Add New Device , page 89).
Add Custom Enter a name for the device and click Add Custom to reserve a
port for a new custom device.
Arrow Bar Use the arrow bar at the top of the frame to open and close the
properties window.