ATEN VK2100, Руководство пользователя

Страница: 71 / 127

Chapter 5. ATEN Configurator (VK6000)
61
Š Function – lists the actions that can be added to the Command list. Select
an option under Device , then double-click or drag & drop actions in the
Function list to add them to the Command list.
Associate Set Flag , Condition , Change Button State , or Change Label
options with actions in the Command list by dragging and dropping them
into a tree view list, so that they initiate together (see Advanced Options ,
page 61).
If you select the Controller from the Device list, you can add the Special
actions listed below. Double-click to add and double-click to configure:
Delay – adds a delay in seconds. Enter a number between 0.1-180.
Relay – adds an Open, Close, Toggle or Pulse action on the selected
controller and Relay port.
D/O – adds an Open, Close, Toggle or Pulse action on the selected
controller and Digital Output port.
Serial Raw (ASCII) – adds a serial command string that is entered
for the port selected in ASCII mode.
Serial Raw (HEX) – adds a serial command string that is entered for
the port selected in HEX mode.
Telnet Raw (ASCII) – adds a telnet command string that is entered
for the device selected in ASCII mode.
Advanced Options
Advanced Options allow you to include conditions with an action. Associate
Set Flag , Condition , Change Button State or Change Label functions with
actions in the Command list by dragging and dropping them into a tree view
listed with the action, so that they initiate together.
Š Set Flag – add a Set Flag to change a Flag’s value when an action changes
a device setting. This sets the Flag value to match the new device setting
(e.g. ON or OFF). Always add a Set Flag to a Condition Flag , after the
device action(s):