ATEN VK2100, Руководство пользователя

Страница: 101 / 127

Chapter 6. ATEN Database Generator
91
Click to delete the selected action.
Click to auto run Learning Mode for all the IR actions
in the Function List . When the Quick Mode window opens, click Start
and follow the instructions on the next page.
Click Learn to start Learning Mode (LED lights green). Point the IR
remote at the IR Receiving port and push a button on the remote until
the LED starts flashing green. When the learning is complete, the LED
will stop flashing.
Click Test to connect to a VK2100 and test the IR action on the device.
A pop-up window will appear to allow you to select the controller,
following which the test will proceed. Check the hardware device to
confirm that it responded appropriately. The IR device must be
connected to
IR Port #1 (the very first IR port on the bottom left side
on the rear of the VK2100) to test the action with a device.
The Status column reports results of Learn and Test. Learn OK
indicates learning Mode was successful and the IR action was saved.
Double-click the Name to edit the Action’s name.
„ Digital Output
Š Function List – Use this section to configure the device functions by
adding actions to the list.
Double-click the Name to edit the Action’s name.
Click the Function drop-down menu to select the type: Open , Close
and Toggle .