ATEN VK2100, Руководство пользователя

Страница: 69 / 127

Chapter 5. ATEN Configurator (VK6000)
59
Action
The Action section of the Button Properties is used to set what a button does
when pressed. Use the table below for an overview and the instructions on the
next page to add
Actions and Advanced Options .
Device Lists the devices and other options that can be selected to add
actions to the Button properties. When a device or option is
selected, actions appear in the Function list. The upper box lists the
hardware devices and VK2100; the lower box lists
Advanced
Options .
Function Lists the actions that can be added to the Command List. When a
Device is selected the actions listed here can be added to the
Command List to configure the button.
Command List Lists the actions that will initiate when the button is pressed. Device
and Advanced Option actions can be added and associated in the
command list together. Actions initiate in the order that they’re
added.
Toggle ON /
Toggle OFF When the Button Mode (page 58) is set to Toggle , the Command
List splits in two and you can set the toggle actions:
Toggle ON – lists the actions that initiate when the button is first
pressed.
Toggle OFF – lists the actions that initiate when the button is
pressed a second time. When the button is pressed again, the
Toggle ON action initiates and the cycle repeats.
Use Move up to move an action up in the command list, or Move
down to move an action down in the command list.
Use Delete to remove an action from the command list.
Use Save as Macro to save the actions in the command list as a
macro.
Use Test Tool to connect to a controller and test the action(s) in the
command list.