ATEN VK2100, Руководство пользователя

Страница: 77 / 127

Chapter 5. ATEN Configurator (VK6000)
67
3. Add Toggle ON and Toggle OFF actions to the Command lists.
4. Under Device , select Change Button State .
5. Select the Device in the Function list.
6. Select the Toggle ON radio button, then double-click the Device in the
Function list to add it to the end of the Toggle ON Command list.
7. Select the Toggle OFF radio button, then double-click the Device in the
Function list to add it to the end of the Toggle OFF actions in the
command list.
8. Double-click the Change Button State in each Command list to set the
Button and Status ( Normal or Pressed ).
Š Change Label – this option changes a label’s text with the text that you
enter manually or with the text from a serial/telnet device’s return message
(i.e. the
Feedback Result ). A Change Label that uses a serial/telnet return
message, must be added to a Feedback Bypass Condition (page 65). A
Manual Change Label can be added at the beginning, end or with a
Condition in the Command list. Adding it to a Condition guarantees the
label will not change unless a condition is met and the action initiates.