ATEN VK2100, Руководство пользователя

Страница: 86 / 127

ATEN Control System User Manual
76
Monitor
A Monitor allows you to set the conditions on a port for the signals from
Digital Input (VDC) and Digital Input (Dry Contact) devices or Flags that
will initiate an action. Digital Input (VDC) hardware devices provide voltage
signals between 1 and 24. Digital Input (Dry Contact) are hardware devices
with open and closed circuit signals. These signals provide indicators from
sensors or switches of an event. An event can be the temperature, power, dry
contact, sensor or switching status from a device.
Create a monitor for a Digital Input port with a Condition that specifies an
Action according to the signal sent from the device.
To create a Monitor:
1. Select Monitor and click + New .
2. The New Monitor menu appears:
Enter a Name and select the Viewer (associated with the room/
device you are configuring) from the drop-down menu, then click
OK .
3. Select the Viewer under Select Viewer and click the Monitor under Preset
Monitor :