System Control
ARM DDI 0500D
Copyright © 2013-2014 ARM. All rights reserved.
4-238
ID021414
Non-Confidential
To access the HSTR:
MRC p15, 4, <Rt>, c1, c1, 3 ; Read HSTR into Rt
MCR p15, 4, <Rt>, c1, c1, 3 ; Write Rt to HSTR
[9]
T9
Trap coprocessor primary register CRn = 9. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 9 to Hyp mode.
The reset value is 0.
[8]
T8
Trap coprocessor primary register CRn = 8. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 8 to Hyp mode.
The reset value is 0.
[7]
T7
Trap coprocessor primary register CRn = 7. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 7to Hyp mode.
The reset value is 0.
[6]
T6
Trap coprocessor primary register CRn = 6. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 6 to Hyp mode.
The reset value is 0.
[5]
T5
Trap coprocessor primary register CRn = 5. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 5 to Hyp mode.
The reset value is 0.
[4]
-
Reserved,
RES
0.
[3]
T3
Trap coprocessor primary register CRn = 3. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 3 to Hyp mode.
The reset value is 0.
[2]
T2
Trap coprocessor primary register CRn = 2. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 2 to Hyp mode.
The reset value is 0.
[1]
T1
Trap coprocessor primary register CRn = 1. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 1 to Hyp mode.
The reset value is 0.
[0]
T0
Trap coprocessor primary register CRn = 0. The possible values are:
0
Has no effect on Non-secure accesses to CP15 registers.
1
Trap valid Non-secure accesses to coprocessor primary register CRn = 0 to Hyp mode.
The reset value is 0.
Table 4-215 HSTR bit assignments (continued)
Bits
Name
Function