Arjohuntleigh Triadyne Proventa Скачать руководство пользователя | Manualshive

Страница: 69 / 88

background image

5-33

1.

Press

Scale

button shown at right.

• The message shown at right will appear in the

Nurse

display panel.

• The

Scale

menu will appear on the main control

panel.

• Rotation, pulsation and percussion will be

deactivated.

2.

To cancel scale,

either

:

• Press

Scale

button again;

or

• Press

Exit

button on the main control panel.

If Rotation was on before scale was activated, five
beeps will sound and the message shown at right
will appear in the

Nurse

display panel. Pulsation

will be restored. Percussion

will not

be restored.

Reactivate percussion from the

Home

menu.

Additional Nurse Display Panel Messages

When standing at the side of the unit, the caregiver views status messages in the

Nurse

display panel

(located on the head end of the footboard). These messages are a result of actions taken not only at the side
rail nurse control panel, but at other points of interface on the unit as well. Messages not yet discussed in this
chapter, and their causes are listed below:

•

On / Off

button on the main control panel has

been pressed to off.

• Rotation is not activated.

• Button for

Head Deflate

on the

Home

menu of

the main control panel has been pressed.

• Power cord has been unplugged and unit is

running on reserve power (only static air support
will be provided).

• The CPR quick release lever has been activated and

will deflate cushions and bladders, level and lower
the patient surface.

• Head of unit has been raised over 35° angle during

rotation. Rotation has been deactivated. Displays
previous state of pulsation.

• A side rail has been lowered during rotation.

Rotation has been deactivated. Displays previous
state of pulsation.

Wt: XXX.X Lb / XXX.X Kg

Turn ON Rotation ?

Air Switch OFF !

Transport Mode

CPR Activated !

Air ON, Pulsation ON

Air ON, Pulsation ON

Air ON Rotation OFF

Head Deflate On !

«
...
67
68
69
70
71
...
»

Содержание Triadyne Proventa

























































































Отзывы:

Нет отзывов

Похожие инструкции для Triadyne Proventa

Бренд: Walker Bay Страницы: 8

Бренд: K&K Страницы: 8

Бренд: SALUDA MEDICAL Страницы: 61

AJSPD850P - P2 DECK

Бренд: Panasonic Страницы: 73

Бренд: G-Lab Страницы: 16

Бренд: G&G Страницы: 2

Бренд: Fenton Страницы: 16

Бренд: ParaBody Страницы: 6

Бренд: ParaBody Страницы: 11

Бренд: Teac Страницы: 44

Бренд: Te Pari Страницы: 6

Бренд: Waters Страницы: 4

Бренд: Waterpik Страницы: 2

Бренд: YASKAWA Страницы: 81

Бренд: YASKAWA Страницы: 52

Бренд: Opvimus Страницы: 50

Бренд: Taurus Страницы: 38

Бренд: Phonocar Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды