Arjohuntleigh Triadyne Proventa Скачать руководство пользователя

Страница: 15 / 88

2-1

Patient Placement

It is recommended that all chapters of this manual be reviewed prior to product use. Carefully read the

Contraindications

Risks and Precautions

and

Safety Information

sections in the

Introduction

chapter

of this manual prior to placing a patient on the

TriaDyne Proventa

Critical Care Therapy System.

Preparation for Patient Placement

Lock caster brakes.

Plug power cord into properly grounded wall outlet.

Do not use wall outlet controlled by a wall switch. Refer to

Avoid Fire Hazards

safety information in

the

Introduction

chapter of this manual.

Level patient surface and adjust

Kinetic Therapy

option, if needed.

The Kinetic Therapy adjustment feature is not available on all units. Refer to pg 5-35 of the

Operating Instructions

chapter.

Configure unit as required (add pillows, blankets, lines, IV poles, other equipment, accessories, etc., to
the weighed portion of unit).

Press

On / Off

button on main control panel to activate air supply to the unit.

Pulsation will be automatically activated. Rotation, percussion and warmer will not automatically
restore.

Calibrate scale to zero:
• Press and hold

Scale On / Off

button on bed motion control panel (located beneath main control

panel).

• Release the

Scale On / Off

button when the words

Let Go For Scale

appear on

Scale

display. This

will turn off the

Trend Angle

display and activate the scale.

• Press and hold

Zero

button to set weight value of all equipment currently on weighed portion of unit

to 0.0 lb (0.00 kg).

• Release the

Zero

button. Allow scale to zero out.

Scale

display will read 0.0 lb (0.00 kg).

Enable bed exit alarm:
• Press and hold

Arm and Disarm

buttons on bed motion control panel together for five seconds.

• Release buttons.

Armed

light will flash.

• Do not touch unit until

Armed

light stops flashing.

Bed exit alarm will be armed once patient is in place.

Preset air pressures using main control panel:
• Press button for

Menu

Home

menu.

Содержание Triadyne Proventa

























































































Результаты поиска

Содержание Triadyne Proventa

Отзывы:

Похожие инструкции для Triadyne Proventa

Бренды по названию

Популярные бренды

Arjohuntleigh Triadyne Proventa, Руководство пользователя

Результаты поиска

Содержание Triadyne Proventa

Отзывы:

Похожие инструкции для Triadyne Proventa

Бренды по названию

Популярные бренды