Arctic Cat M 8000, Руководство по обслуживанию

Страница: 104 / 210

103
46. Secure the starter clutch while using the spanner
wrench and tighten the three cap screws (from step
45) evenly to 19 ft-lb.
FC081
47. Using the spanner wrench, tighten the flywheel cap
screw (from step 45) to 50 ft-lb.
48. Install the coolant inlet hose to the cylinder head and
water pump; then tighten the hose clamps securely.
XM023

NOTE: At this time if the coolant temperature sen-
sor was removed, install the sensor (threads coated
with blue Loctite #243) and tighten to 18 ft-lb.
49. Apply a thin coat of high-temperature silicone seal-
ant to each exhaust port; then install the exhaust gas-
kets.
50. Apply a thin coat of High-Temp Sealant to the mat-
ing surfaces of the exhaust manifold; then install the
exhaust manifold and secure with the eight nuts.
Tighten the nuts using the pattern shown to 17 ft-lb.
0742-292