Arctic Cat M 8000, Руководство по обслуживанию

Страница: 146 / 210

145
SNO-574
9. Remove the eight cap screws securing the MAG side
of the starter motor to the starter motor retaining
plate. Account for the negative battery cable and
external tooth washer.
SNO-352A
10. Remove the two cap screws (A) and one Allen-head
screw (B) securing the starter motor to the starter
motor mounting bracket. Remove the starter.
XM044A
11. If the starter motor is being replaced, remove the
snap rings securing the starter motor gear to the
starter motor shaft. Remove the gear.
SNO-573
REMOVING (6000)
1. Remove the seat and disconnect the battery; then
remove the hood and both access panels.
2. Remove all springs securing the expansion chamber
and resonator; then remove the expansion chamber
and resonator.
3. Remove the two screws (A) securing the heat shield
to the chassis; then remove the heat shield from the
two front locating pins (B) and remove the heat
shield.
EL-001A
4. Disconnect the ECM; then remove the screws secur-
ing the right and left-side fascia panels to the chassis.
Remove the panels and ECM as an assembly.
EL-002A
5. Remove the cap screws and lock nuts securing the
shock mount bracket support to the shock mount
brackets; then remove the shock mount bracket sup-
port.