3-26
KM621
7. Remove the shift fork; then remove the main shaft
assembly.
KM622A
8. Remove the countershaft; then remove the primary
drive axle.
KM627B
A. Transmission (250 Utility)
1. Drain the transmission lubricant into a suitable
container; then install the drain plug and tighten to
21 ft-lb.
KM106
NOTE: If the engine has not been removed,
remove the swing arm assembly (see Section 7).
2. Using a crisscross pattern, remove four cap screws
securing the secondary driven bevel gear assembly
to the transmission case cover; then remove the
assembly. Account for an O-ring.
KM646A
3. Remove the three cap screws securing the second-
ary drive bevel gear cover; then remove the cover.
Account for a gasket.
KM648A
4. Remove the speedometer gear retainer nut,
washer, and speedometer gear.
Back to TOC
Back to Section TOC
Next
Back
Содержание ATV 250 Utility 2009
Страница 1: ......