Aptiv Digital Passport DCT, Руководство по обслуживанию клиентов

Страница: 103 / 165

Setting Settop Audio
Passport DCT Customer Service Guide
97
.................................................................................................................
....
..
Setting Settop Audio
Note: If you have a DCT 2500 set-top box, you don't have the options for Loop-Through and
Dynamic Range.
You can specify audio preferences with the following options:
• Setting the Volume Level, page 97
• Setting the Analog Channel Audio, page 99
• Setting the Digital Channel Audio, page 101
• Setting the Loop-Through, page 103
• Setting the Dynamic Range, page 105
Setting the Volume Level
Passport DCT allows you to set the cable set-top box’s volume to variable or to a fixed level
(approximately 68-69% of the maximum volume) which is the optimum set-top box audio
output level. If you set the volume to a fixed level and press the + or - VOL button, the volume
level is automatically set to variable from then on. With a VCR Timer-initiated recording, the
set-top box reverts to the fixed setting for the duration of the recording.
2 The Output Format Options Ribbon displays in
the lower screen
• A message displays telling you to press the UP or DOWN button to shift to a
different option (discussed in the previous procedure). The option name displays on
the ribbon. The available options are the same as shown in section covering Output
Format Option on page 95.
3 To exit, press the EXIT button (or any other remote button other than the # button).